Alert Types
-
(AB) Adaptor Board Not Found
Hardware Alert
When an Adaptor Board not Found (AB) alert occurs, it...
-
(ALK) Advanced Leak
OptiFlow Alert
When an advanced leak alert occurs, flow has exceeded both...
-
(CCRP) Climate Center Rain Pause
Status Alert
When a Climate Center Rain Pause (WeatherTRAK Rain Pause) alert...
-
(CLK) Catastrophic Leak
OptiFlow Alert
When a catastrophic leak alert occurs, flow has exceeded the...
-
(CM) NO ET Communication
Communication Alert
A No ET Communication Alert is a...
-
(CO) Controller Off
Status Alert
When a Controller Off (CO) status alert occurs, it means...
-
(CP) Controller Paused
Status Alert
When a controller paused alert occurs, it means that irrigation...
-
(DY) Water Day
Status Alert
Possible Cause: Current weather conditions require run times that exceed...
-
(EP) User Event Pause
Status Alert
When a user event pause alert occurs, it means that...
-
(EX) Extended Leak
System Alert
When an extended leak occurs, flow has exceeded the leak...
-
(FLO) Flow Key Missing
Hardware Alert
When a flow key missing alert occurs, it means that...
-
` (HW) Hardware
Alert
A hardware alert occurs when the controller is not detecting...
-
(HF) Station High Flow
System Alert
When a station high flow alert occurs, flow has exceeded...
-
(LF) Station Low Flow
System Alert
When a station low flow alert occurs, the station’s flow...
-
(LK) Leak
Flow Alert
A Leak alert occurs when the flow has exceeded the...
-
(MBlk) Mainline Break Leak
Flow Alert
When a mainline break leak alert occurs, flow has exceeded...
-
(MB) Mainline Break
Flow Alert
If a mainline break has occurred, flow has exceeded the...
-
(MDAC) Master Valve Decoder Address Conflict
System Alert
A Master Valve Decoder Address Conflict happens when the controller...
-
(MDNF) Master Valve Decoder not Found
System Alert
A Master Valve Decoder not Found alert happens when the...
-
(MHF) Manager High Flow
OptiFlow Alert
When a manager high flow alert occurs, flow has exceeded...
-
(MI) Manual Irrigation
Status Alert
When a manual irrigation status alert occurs, it means that...
-
(MLF) Manager Station Low Flow
OptiFlow XR Flow Alert
A Manager Station Low Flow alert occurs when the total...
-
(MNF) Manager No Flow
OptiFlow Alert
A Manager No Flow alert occurs when flow has dropped...
-
(MVF) Master Valve Fault
Valve Alert
When a master valve fault alert occurs, the master valve...
-
(MVO) Master Valve Override
Flow Alert
When an MV Override (MVO) status alert occurs, it means...
-
(NC) No Connect
System Alert
When a valve No Connect alert occurs, the current draw...
-
(NF) No Flow Alert
System Alert
A no flow alert means that the flow has dropped...
-
(OC) Over-Current
System Alert
When a valve over-current alert occurs, the current draw for...
-
(OFI) OptiFlow Inspector
OptiFlow Alert
When an OptiFlow Inspector alert occurs, it means that the...
-
(OFL) Controller Offline
Communication Alert
...
-
(PK) Permission Key
OptiFlow Alert
An OptiFlow permission key resembles a USB thumb drive and...
-
(POC) Point of Connection not Found
Hardware Alert
When a Point of Connection Not Found alert occurs, it...
-
(PSM) Pump Start Missing
Hardware Alert
When a Pump Start Missing (PSM) alert occurs, it means...
-
(RS) Rain Switch On
Status Alert
Coming soon
-
(SB) ET Subscription
Account Alert
An ET Subscription Alert is an account alert, indicating that...
-
(SBK) Station Break
System Alert
Note This type of alert applies to OptiFlow controller only....
-
(SD) System Shutdown
Status Alert
When a system shutdown alert occurs, it means that a...
-
(SDAC) Station Decoder Address Conflict
System Alert
A Station Decoder Address Conflict happens when multiple station decoders...
-
(SDNF) Station Decoder not Found
System Alert
When a Station Decoder not Found alert occurs it means...
-
(SE) SE Irrigation ON
Status Alert
When a SE Irrigation ON (SE) alert occurs, it means that...
-
(SH) Valve Short
System Alert
When a short alert occurs, the current draw for a...
-
(SHD) Station High Depletion
System Alert
When a station high depletion alert occurs, it means that...
-
(SNF) Stations Not Found
Hardware Alert
When a stations not found alert...
-
(SOC) System Over Current
System Alert
When a system over current alert occurs, it means...
-
(TBM) Terminal Board Mismatch
Hardware Alert
Note This alert is for the ET Pro3 and OptiFlow...
-
(UU) Unexpected Usage
OptiFlow Alert
Info An unexpected usage alert is for the OptiFlow controller...
-
(UKM) Update Key Missing
Hardware Alert
A cloud update key resembles a USB thumb drive and...
-
(W) Winterized
Status Alert
When a winterized alert occurs, it means that the controller...
-
(WD) Water Window
Status Alert
When a water window alert occurs, there is a conflict...
-
(URP) User Rain Pause
Status Alert
When a user rain pause alert occurs, it means that...