A Leak alert occurs when the flow has exceeded the Leak Detect Threshold for the first leak delay period.

Possible Causes

• A quick coupler or hose bib is being used
  
  
• A valve is not closing completely and is leaking
  
  
• A mainline fitting has a crack and is leaking
  
  
• A mainline pipe has developed a slow leak
  
  
• A quick coupler is stuck partially open or a hose bib has been left open
  
  
• This type of alert is for informational purposes. No action will be taken on the controller.

Possible Fixes:

• Repair any valves, quick couplers, or hose bibs.
  
  
• Prevent the unauthorized use of a quick coupler or hose bib.
  
  

To Clear a Leak Alert from the Controller:

1.  Press ALERTS.

2.  Press à. The VIEW FLOW STATUS screen displays.

3.  Press * to clear the alert.

To Clear a Leak Alert from WeatherTRAK Central:

1.  Hover over the Alerts tab and click on Alert List. A list of all active alerts will display.

2.  Place a checkmark next to the alert you would like to clear.

3.  Press the Clear Flow and Electrical Alerts button. A pop-up screen displays asking you to verify the change. Click Yes.