All points of connections must be configured so they have one or more of the following: a master valve, a pump, and/or a flow sensor.

POC’s and mainlines are configured in the Flow section in WeatherTRAK Central.

1.  Log into WeatherTRAK Central. 

2.  Hover over the  Smart Irrigation tab, and select Program.

3.  Navigate to the Flow section of the page. 

Configure the following:

• Points of Connection 
• Mainlines
• Excluded Stations
• Flow Alert Clearing
• Delay Before Learning  
• Station High Flow Offset % 
• Station Low Flow Offset %
• Excluded Stations

Note: It is important to select None if a master valve does not exist. Selecting Normally Open or Normally Closed when you do not have a master valve may cause a Valve alert that can prevent irrigation.