1. Make sure that the irrigation controller you want to work with is displayed in the BaseManager footer. To select a different controller, click the Menu icon 
in the upper-left corner of the BaseManager page, and then click Sites and Controllers. Continue drilling down until you can select the desired controller.
2. Make sure the moisture sensors that you want to assign are connected to the two-wire path of the irrigation controller displayed in the BaseManager footer.
3. Position the cursor on the Devices tab, and then click Moisture Sensors in the menu that displays.
4. Click Assign Sensors. BaseManager searches for the moisture sensors that are connected to your controller.
5. In the Serial Number column of the sensor ID row, click the drop-down arrow, and then click the serial number of the moisture sensor that you want to assign.
6. Click in the Description column and type a description that makes the sensor easy to identify.
Note
Limit the number of characters in the Description to 32 characters (BaseStation 1000) or 42 characters (BaseStation 3200). If you enter a longer description, the controller will automatically shorten it, and then pass the new version back to BaseManager.
7. Repeat steps 5 and 6 until you have assigned all sensors.
Note
If you need to change the moisture sensor information, refer to Updating Moisture Sensor Details.