Call Us 800.362.8774 Call Us 866-294-5847 Contact Training Training Training WeatherTRAK Login WaterCompass Login AppManager Login

Knowledgebase

    Controller Status Icons

    WeatherTRAK Mobile

    PDF es:

    A Controller's Status icon is displayed in a few locations within the Mobile app. Most noticeably, the Controller Settings button on the Controller List page.


    Online

    The controller is online and communicating properly with the network. ET updates are being received and remote access is available.


    Off

    This mode will cause the WeatherTRAK controller to stop current and future irrigation indefinitely. Depletion for stations in auto WILL be accumulated and the controller will still run the daily valve check.


    Offline

    The controller is offline and not communicating properly with the network. User remote access is unavailable, and ET updates will not be received. The system WILL continue to irrigate, based on programmed information in the controller.


    Manual Watering

    The controller has been temporarily set to manual water.


    Winterized

    This mode is intended to be used after winterizing your system. The controller continues to communicate with the cloud features, but no irrigation occurs.


    Shutdown

    This mode will cause the WeatherTRAK controller to stop current and future irrigation indefinitely. Depletion for stations in auto will be accumulated, the normally open master valve will be energized and the controller will still run the daily valve check. This mode should not be used long-term as continuous power to a solenoid may cause premature solenoid failure.


    Master Valve Override

    Enabling the Master Valve override allows extra water to flow through the system without triggering a Mainline Break Alert.


    Rain Pause

    System pause for rain events.


    Lock/Unlock

    For OptiFlow models. When set to unlock, users have the ability to perform functions from the controller that aid in-field troubleshooting. Functions include manual irrigation, mode changes, alert clearing, valve tests, manual diagnostics, communications menu, restarting the controller. Note: Programming changes or rain pauses cannot be made while in unlock mode.


    Controller Update Needed

    The controller needs updating. Contact customer support.


    Alerts

    Notifications that the system needs attention.