When a Point of Connection Not Found alert occurs, it means that a program has been assigned to a mainline which does not have a configured Point of Connection (POC). When this type of alert occurs, the controller cannot get flow information or control a master valve for the program. 

The controller will still run stations normally.

Possible Causes:

• The master valve is set to normally open or normally closed, but the master valve is not found.
  
  
• A flow sensor is selected, but the flow sensor is not found.
  
  
• The pump start is assigned to a station, but that station is not found.

Possible Solutions:

• Configure and assign the appropriate POC to the mainline.
  
  
• Change the program to a mainline with a configured POC.
  
  

To learn more about flow and configuring POC’s, read: Selecting Flow Options for Learning

Clearing a Point of Connection Not Found (POC) Alert:

This alert must be cleared by fixing the configuration issue.