Manual operation allows you to immediately start irrigation for any individual station or for all stations. Manual operation lasts for a specified number of minutes and starts immediately. Only one manual station can be on at a time while watering in MANUAL mode.

Manual Operation for Specific Stations

Manual operation can be set for specific stations to operate with the same or varying run times.

1.  Turn the MAIN knob to MANUAL.

2.  Turn the Lower Line knob to select Specific Stations.

3.  Turn the Upper Line knob to select the station you want to manually water.

4.  Turn the Lower Line knob to select the number of minutes you would like to water for.

5.  Repeat steps 3-4 to enable other selected stations to run manually.

Manual Operation for All Stations

Manual operation can be set for all stations to operate with the same run times.

1.  Turn the MAIN knob to MANUAL.

2.  Turn the Lower Line knob to select All Stations.

3.  Turn the Lower Line knob to select the number of minutes you would like to water for.

Manual irrigation will start immediately on Station 1. The display will change to reflect the current watering status.

To discontinue manual operation, turn the MAIN knob to OFF to display “Irrigation is Turned OFF.” Then, turn the MAIN knob to RUN.