Call Us 800.362.8774 Call Us 866-294-5847 Contact Training Training Training WeatherTRAK Login WaterCompass Login AppManager Login

Knowledgebase

    Coach's Button biCoder Installation Guide

    BL-5401Coach's Button

    PDF es:

    Table of Contents

    Installation Instructions

    1.  Power off the two-wire when installing devices. 

    2. Leave 24 to 36 inches of slack on the two-wire to allow for easy installation and maintenance.

    3.  Mount the coach’s button to a vertical surface with four screws and suitable wall anchors.

    4.  Connect the red and black wires from the biCoder to the corresponding red and black wires on the two-wire. It is critical that polarity be maintained. 

    • Follow electrical codes and practices. Refer to the controller’s user manual for configuration instructions.
    • Principle Splicing Tips