Call Us 800.362.8774 Call Us 866-294-5847 Contact Training Training Training WeatherTRAK Login WaterCompass Login AppManager Login

Knowledgebase

    Irrigation Controller Shortcuts

    BaseStation 3200

    PDF es:

    When you are configuring the settings on a BaseStation irrigation controller, you need to navigate through many screens and press the controller buttons many times to complete the tasks. Fortunately, the following shortcuts will help you complete some of the most commonly performed tasks more quickly.  

     

    Quickly Move to the Next Item for Configuration

    When you are configuring zones (the controller dial is on Zones), you can press the Enter button in any field to move to the next zone number.

    When you are setting up programs (the controller dial is on Programs), you can press the Enter button in any field other than the Program field to move to the next program.

    This shortcut also works in other screens with a similar layout, such as Water Sources > Assign Devices to Water Sources. Pressing Enter in any field will advance to the next POC.


    Note

    If you make changes on one screen and then press Enter to advance to the next screen, your changes on the first screen are saved.


    Quickly Return to Zone 1

    When you are configuring zones (the controller dial is on Zones), you can press the Back button when the cursor is in the Zone field to go to Zone 1.


    Calculate the Cycle Time and Soak Time Settings

    When you are configuring zone watering times and soak cycles (controller dial is on Zones), you can let the controller calculate the cycle time and soak time settings for you. Enter the total run time in the Water Time field. Press the Next button to move to the minutes placeholder in the Soak Time field, and then press the Back button. The controller divides the time in the Water Time field by 3. This value is used for the cycle time and the default soak time is double the cycle time.

    If you want to change the values in the Cycle Time and Soak Time fields to the controller-calculated values, press the Next button to move to the minutes placeholder in the Soak Time field, and then press the Back button. The values change to zeroes. Press the Back button again and the controller-calculated values display in the fields.


    Rapidly Delete All Messages on the Controller

    To rapidly delete all messages on the controller:

    1.  Turn the dial to Messages.

    2.  Press Next to select Delete.

    3.  Press and hold Enter until the controller shows that all the messages have been deleted.


    Select an Item in the Left Column when the Cursor is in the Right Column

    In screens with a two-column layout, such as the one illustrated here, you can select an item in the left column when the cursor is in the right column.

    Press Enter as needed to select the item in the left column, and then press + or to make the assignment in the right column.


    Select an Item in the Right Column when the Cursor is in the Left Column

    When you are setting up event days for a program, you can press Enter when the cursor is in the Date column to select a different program in the right column.


    Quickly Move to the Bottom of a List

    When the cursor is at the top of a long list, you can quickly move to the bottom of the list by pressing the button.

    This shortcut works in any list, and it is especially useful when you are in the Self Test > Test Single Two-wire Device option.


    Enter a Large Number a Cell

    If you need to enter a large number in one of the cells of the IP address in the BaseManager Server Setup screen, press the button. The highest allowed number (255) displays in the field. Then press the button as needed to set the specific number.

    To rapidly increase the number in a field, press and hold the + button.

    To rapidly decrease the number in a field, press and hold the button.