The Quick View page summarizes the status of the controller, its assigned devices, programs, control points, mainlines, water sources, and any alarms and messages on a single page. You will see different information in Quick View depending on the controller that is displayed in the BaseManager footer.
Note
Water sources, control points, and mainlines do not display in Quick View if their status is Unassigned.
1. Make sure that the irrigation controller you want to work with is displayed in the BaseManager footer. To select a different controller, click the Menu icon 
in the upper-left corner of the BaseManager page, and then click Sites and Controllers. Continue drilling down until you can select the desired controller.
2. Click the Quick View tab. The Quick View page shows the statuses, the messages, and the device details for the selected controller.
3. You can perform the following tasks on the Quick View page:
Expand or Collapse a Section
Click the 
or the 
in the header of any section on the Quick View page to expand or collapse the section. When collapsed, the Zone Status and the Programs Status still show two grids.
View Status by Color
Check the Status grids on the left side of the page for colored squares that represent a specific status. The Status Color key is available from the BaseManager menu.
View Status Details
In the Status grids on the left side of the page, click in the square for the specific item that you want to see details for. The details display in a pop-up box. Click the "X" in the upper-right corner to close the box.
Manually Run a Zone, Program, or Master Valve
In the Zone Status, Program Status, or Master Valve Status grids on the left side of the page, click in the square for the specific zone, program, or master valve that you want to manually run. In the pop-up box, type a number in the Minutes field, and then click 
.
Set a Zone or Program to Done
In the Zone Status and Program Status grids on the left side of the page, click in the square for the specific zone or program that you want to stop. In the pop-up box, click 
.
Test an Item from the Status Grids
In the Status grids on the left side of the page, click in the square for the specific item that you want to test, and then click the Test icon 
. The test results display in the pop-up box.
Learn Flow for a Zone or Program
In the Zone Status and Program Status grids on the left side of the page, click in the square for the specific zone or program that you want to learn flow for. In the pop-up box, click 
.
View a Chart for a Zone or Program
In the Zone Status and Program Status grids on the left side of the page, click in the square for the specific zone or program that you want to view a chart for. In the pop-up box, click 
.
Edit an Item from the Status Grids
In the Status grids on the left side of the page, click in the square for the specific item that you want to edit. In the pop-up box, click 
.
Sort the Message List
In the Messages section on the right side of the page, click on any of the column headers to sort the list in either ascending or descending order by the data in that column.
Delete a Message
In the Messages section on the right side of the page, click the "X" at the end of the row for the message that you want to delete.
Clear All Messages
In the Messages section on the right side of the page, click the Clear All Messages at the bottom of the section.
View Weather Station Information
If you have a weather station assigned to the controller, you can see the weather station description, the calculated ETo amount, and the date and time when the weather data was captured. For more detail, refer to Viewing Weather Station Information in Quick View.