Call Us 800.362.8774 Call Us 866-294-5847 Contact Training Training Training WeatherTRAK Login WaterCompass Login AppManager Login


    Assigning Pumps (BaseStation 3200)

    BaseManager: Setting Up Your Controller

    PDF es:

    1.  Make sure that the irrigation controller that you want to assign pumps to is displayed in the BaseManager footer. To select a different controller, click the "Menu" icon 1620692756053-1620692756053.png in the upper-left corner of the BaseManager page, and then click "Sites and Controllers". Continue drilling down until you can select the desired controller.

    2.  Make sure the pumps that you want to assign are connected to the two-wire path of the irrigation controller displayed in the BaseManager footer.

    3.  Click the "Devices" tab, and then in the menu that displays, click "Pumps". The main Pumps page displays

    4.  Click "Assign Pumps". BaseManager searches for the pumps that are connected to your controller.

    5.  In the "Serial Number" column of the pump "ID" row, click the drop-down arrow, and then click the serial number of the pump that you want to assign.

    6.  Click in the "Description" column and type a description that makes the pump easy to identify.


    Limit the number of characters in the Description to 32 characters (BaseStation 1000) or 42 characters (BaseStation 3200). If you enter a longer description, the controller will automatically shorten it, and then pass the new version back to BaseManager.

    7.  Repeat steps 5 and 6 until you have assigned all pumps.

    8.  Click the "Save" button in the BaseManager footer. The main Pumps page displays. To have the pump that you just added display in the list, click the "Refresh" button on the upper-right side of the page.


    If you need to change the pump information, refer to Updating Pump Details.