Call Us 800.362.8774 Call Us 866-294-5847 Contact Training Training Training WeatherTRAK Login WaterCompass Login AppManager Login

Knowledgebase

    Assigning Flow Meters

    BaseManager: Setting Up Your Controller

    PDF es:

    1.  Make sure that the irrigation controller that you want to assign flow meters to is displayed in the BaseManager footer. To select a different controller, click the Menu icon 1620692756053-1620692756053.png in the upper-left corner of the BaseManager page, and then click Sites and Controllers. Continue drilling down until you can select the desired controller.  

    2.  Make sure the flow meters that you want to assign are connected to the two-wire path of the irrigation controller displayed in the BaseManager footer.

    3.  Click the Devices tab, and then in the menu that displays, click Flow Meters. The main Flow Meters page displays.

    4.  Click Assign Flow Meters.  BaseManager searches for the flow meters that are connected to your controller.

    5.  In the Serial Number column of the flow meter ID row, click the drop-down arrow and then click the serial number of the flow meter that you want to assign.

    6.  Click in the Description column and type a description that makes the flow meter easy to identify.

    Note

    Limit the number of characters in the Description to 32 characters (BaseStation 1000) or 42 characters (BaseStation 3200). If you enter a longer description, the controller will automatically shorten it, and then pass the new version back to BaseManager.


    7.  Repeat steps 5 and 6 until you have assigned all flow meters.

    8.  Click Save in the BaseManager footer. The main Flow Meters page displays. To have the flow meter that you just added display in the list, click Refresh on the upper-right side of the page.

    Note

    If you need to change the flow meter information, refer to Updating Flow Meter Details.