Call Us 800.362.8774 Call Us 866-294-5847 Contact Training Training Training WeatherTRAK Login WaterCompass Login AppManager Login

Knowledgebase

    Adding Controllers to BaseManager

    BaseManager: Administration

    PDF es:

    IMPORTANT

    To add a controller to BaseManager, the controller must have an active communication option such as Wi-Fi, Cell Modem, or Ethernet Radio, and the controller must be connected to BaseManager over the Internet.


    After a controller connects to BaseManager, but before it has been added to a company and a site in BaseManager, the controller displays a PIN.


    Finding the PIN on a BaseStation 3200 Controller

    The PIN displays in pop-up message as shown in the illustration. Write down the PIN paying careful attention to the upper and lower case letters.

    If you need the MAC address for the BaseStation 3200 controller, turn the controller's dial to the "Network" position, and then press the "Enter" button to select the BaseManager Server Setup option. The MAC address is recorded on that screen.

    Finding the PIN on a BaseStation 1000 Controller

    The PIN displays in a message, but after that message box is dismissed from the display, you can find the PIN on the BaseManager Info screen. To display this screen, press the "System Setup" button. Press the "Down Arrow" button to highlight the Network Setup option, and then press "OK". Press the "Down Arrow" button to highlight the BaseManager Info option, and then press "OK". The PIN displays on the last line as shown in the illustration.

    Write down the PIN paying careful attention to the upper and lower case letters. If you need the MAC address of the BaseStation 1000 controller, it is recorded in the MAC field on this screen.




    To add a controller to BaseManager

    BaseManager users with Site Manager or Company Admin accounts can access the BaseManager Administration interface and add controllers to sites within the company.

    1.  After you have logged into BaseManager, click the "Menu" icon  in the upper-left corner of the page.

    2.  In the menu, click "Administration".

    3.  In the next menu, click "Administration" again. The BaseManager Administration interface opens in a new browser tab.

    4.  In the My Company Admin menu on the left side of the page, position the cursor on "My Controllers". In the expanded menu, click "Add a New Controller". The Authorize a Controller by PIN page displays.

    5.  Click the drop-down arrow in the "Choose Site" field, and then click the site that you want this controller to be associated with.

    6.  In the "Enter PIN" field, highlight the default text in the field, and then type the PIN for the controller that you want to Add/Authorize.

    Note

    Remember that the PIN is case sensitive. You must type the uppercase and lowercase letters exactly as they were displayed on the controller.


    7.  Click the check boxes for the users who should have access to this controller, and then click the "Authorize Controller" button. The success message displays.

    8.  Click the button to "Further Customize this Controller".

    9.  In the "Friendly Name" field, type a descriptive name for the controller that helps you identify it in the field.

    Note

    Limit the number of characters in the Description to 32 characters (BaseStation 1000) or 42 characters (BaseStation 3200). If you enter a longer description, the controller will automatically shorten it, and then pass the new version back to BaseManager.


    10.  Accurately complete the Country, State, City, Zip, and Street fields in order to have this controller display on the map in the proper location.

    11.  Click the drop-down arrow in the "TimeZone" field and choose the correct time zone for the location of the controller. Setting this field accurately will ensure that the controller will always have the correct time while it is connected to BaseManager.

    Note

    If the controller that you added does not show up in the list under the menu on the left side of the map, you might need to refresh the web page. Click "OK" when the browser displays a message about resending the data.



    Updating Controller Information

    BaseManager users with Site Manager or Company Admin accounts can access the BaseManager Administration interface and update controllers that have been added to the company.

    1.  After you have logged into BaseManager, click the Menu icon the upper-left corner of the page.

    2.  In the menu, click Administration.

    3.  In the next menu, click Administration again. The BaseManager Administration interface opens in a new browser tab.

    4.  In the My Company Admin menu on the left side of the page, position the cursor on My Controllers. In the expanded menu, click Edit My Controllers. The controllers that you have added to BaseManager display in a table.

    5.  Find the row for the controller that you want to update, and then click the Edit button.

    6.  Change the controller information as necessary.

    7.  To save your changes, click the Edit button.