LTE Signal Test Kit is a network scanner used to identify which bands and carriers are available on the site. Band availability depends on nearest cell tower, topography, etc. This helps Customers:
- measure the local signal strength (RSRP) and quality (RSRQ) to ensure signal meets system connection requirements
- identify strongest and best carrier and band, which determines which SIM and antenna to use
- identifies location of cell tower for angling directional antennas.
We recommend all Customers perform this signal test prior to purchasing a controller or antenna to amplify the signal. This is the only way to ensure the controller will be able to connect to our cloud for ET updates.
Resources:
LTE Signal Test Kit Instructions (LTE Bands our Controllers work with are on p 10)

For Ethernet Antenna Installation Instructions see the Ethernet Radio Antenna Installation Guide.
For Lightning Arrestor Installation Instructions see the BL-CX-LA High Gain Antenna Lightning Arrestor Installation Guide.
For Communication Issues see Troubleshooting Cell Modem & Network Connections (Baseline) or (OFL) Controller Offline (WeatherTRAK). If you think you need to update your firmware, please fill out this form: WeatherTRAK Controller Firmware Update Request (jotform.com)
Signal Amplification Solutions
How to Connect Antenna to Modem
Which Signal is Compatible with Controller?
Which Provider matches the reader's frequency/ wavelength? Which antenna matches the reader's frequency?
