Tips & Troubleshooting
-
Menu Buttons
The WeatherTRAK front panel has three types of menu buttons: ...
-
Troubleshooting Blown or Popping Fuses
WeatherTRAK Controllers
This article will provide troubleshooting and diagnostic steps to perform...
-
Difference Between User with ET & Auto Mode
WeatherTRAK Controllers
The two modes on WeatherTRAK controllers that use Evapotranspiration (ET)...
-
Decommissioning a 2nd Adaptor Board
WeatherTRAK Controllers
When an Adaptor Board Not Found alert occurs, it means...
-
Using the MAD Limit Switch for Sports Turf
WeatherTRAK Controllers
MAD is the maximum allowed depletion rate at which the...
-
Using a Clamp-on Tester to Test Ground Resistance
Irrigation Troubleshooting
Using a Clamp-on Tester to Test Ground Resistance Important In...
-
Grounding Principles
Irrigation Troubleshooting
What is grounding? The National Electric Code®, Article 100 defines...
-
Measuring Ground Resistance with the 62% Method
Irrigation Troubleshooting
Measuring Ground Resistance with the 62% Method Ground resistance is...
-
Troubleshooting Two-Wire
In this article, you'll learn the basics of diagnosing and resolving issues with two-wire systems.
If your 2-wire displays an Over-Current message, all watering stops...
-
What is Evapotranspiration?
WeatherTRAK
Evapotranspiration, often shortened to ET, is the process of transferring...
-
Cellular Communication (LTE) Antenna Tips
For Cellular Communication Antennas For Directions on installing the...