WeatherTRAK Controllers get new features and firmware updates several times per year. Make sure your controllers are on the latest firmware for the best performance and to ensure compatibility with all the features on WeatherTRAK Central and WeatherTRAK Mobile.

Requesting a controller firmware update

In order to update your controller(s) to the latest firmware, you will need to submit a request to Customer Support. Click here to get started.

Current Controller Firmware Versions:

• WeatherTRAK ET Pro2 and ET Pro2 Smart Water Manager: 6.8
  
  
• WeatherTRAK LC and LC+: 7.13
  
  
• WeatherTRAK ET Pro3: 7.13
  
  
• WeatherTRAK ET Pro3 with OptiFlow Key and OptiFlow enabled: 8.11
  
  
• WeatherTRAK OptiFlow XR (Setup Mode): 7.13
  
  
• WeatherTRAK OptiFlow XR (OptiFlow enabled): 8.11
  
  
• WeatherTRAK OptiFlow XR (H2O 2-wire 200 Station): 8.11

The latest Bootloader version (shown as “BL” in the control panel) for all controllers except Pro2 is version 3.0.1.0. This version of the bootloader is included with all firmware updates for 7.8.2 and 8.4.2 and later.

Read the below article to learn how to determine the firmware version or your controller: 
How Do I Find the Firmware Version on my Controller?

Cloud Update Key

To deliver the latest firmware version to your controller over the air, you’ll need to install the Cloud Update Key in the controller. All controllers shipped as of April 16, 2018, already include this key.

• The Cloud Update Key works with the ET Pro3 and LC series controllers.
  
  
• If your controller is running 7.8.2 or 8.4.2 or later, it already has the Cloud Update Key installed.
  
  
• If you are using an OptiFlow key for the OptiFlow XR or ET Pro3, you do not need a Cloud Update Key. The OptiFlow key includes this functionality.
  
  

To obtain a Cloud Update Key, click here.