Call Us 800.362.8774 Call Us 866-294-5847 Contact Training Training Training WeatherTRAK Login WaterCompass Login AppManager Login

Knowledgebase

    Hydrometers with Incorporated Flow & Master Valve biCoders

    BL-BHM Series BiCoders

    PDF es:

    Table of Contents

    Installation Instructions

    1. Power off the two-wire when installing any two-wire device. Leave 24 to 36 inches of slack in the two-wire at the connection point to allow for easy installation and maintenance.
    2. Follow the instructions in the Netafim installation manual: Operation, Installation & Maintenance Guide
      • Follow the instructions in the controller’s user manual to configure each device (ex: normally open vs normally closed master valves have different configurations) instructed in the controller’s user manual.
    3. Connect the red and black wires from the flow biCoders to the corresponding red and black wires from the two-wire path. Make certain to maintain polarity. All two-wire connections must have 3M™ DBR/Y-6 or equivalent moisture-resistant connectors.

    K-Value and Offset Table for Each Model

    Delete

    Principle Splicing Techniques

    Delete