If a flow fault is reported on the BaseStation 1000 controller, you must clear the fault to return the controller to normal operation. You can clear the fault on the controller or by using LiveView in BaseManager.

1.  Make sure that the irrigation controller you want to work with is displayed in the BaseManager footer. To select a different controller, click the "Menu" icon in the upper-left corner of the BaseManager page, and then click "Sites and Controllers". Continue drilling down until you can select the desired controller.

2.  Click the "LiveView" tab. The LiveView page shows the controller faceplate.

3.  Click the "Run" button.

4.  Click the "🡪" button until "Flow & MV/Pump Status" displays.

5.  Click the "OK" button.