Call Us 800.362.8774 Call Us 866-294-5847 Contact Training Training Training WeatherTRAK Login WaterCompass Login AppManager Login

Knowledgebase

    Water Adjustments

    WeatherTRAK ET Pro3 & LC+

    PDF es:

    The WeatherTRAK controller features an ADJUST menu that allows for adjustments in watering. Two types of adjustments can be made:

    1.  Adjusting water amount which increases or decreases individual station run times.

    2.  Adjusting day frequency increases or decreases the water days without changing runtimes.


    Changes can be made on a station by station basis. This feature allows for fine tuning of a specific or several stations without applying a percent adjust at the program level. For example, if a specific station appears too wet, you can use the “water amount” option to decrease the station’s runtime. The range of adjust is 50% less water to 25% more water in 5% increments. Conversely, if a station appears to dry out or stress between irrigation cycles, you can use the “Adjust Day Frequency” function to resolve the condition.

     


    Adjusting Station Water Amounts 

    When adjusting the amount of water that is being applied to your landscape, it is recommended that you start with a 5%-10% adjustment and observe the effects of your changes over the course of a week.

    1.  Press the ADJUST button.

    2.  Press the + or button to select the Water Amount adjustment.

    3.  Press the ß or à button to select the station you would like to adjust.

    4.  Press the + or button to make the percentage adjustment to the station. For example, if you choose +10%, you will be applying 10% more water to your landscape.

    Note

    If a station has been assigned as a pump start, you will get a message that says “Non-adjustable Mode.”



    Adjusting the Day Fequency/Depletion

    When adjusting the Day Frequency/Depletion, it is recommended that you start with a 5%-10% adjustment and observe the effects of your changes over the course of a week.

    1.  Press the ADJUST button.

    2.  Press the + or button to select the Day Frequency/Depletion adjustment.

    3.  Press the ß or à button to select the station you would like to adjust.

    4.  Press the + or button to make the percentage adjustment to the station. For example, if you choose +10%, you will be adding 10% more days to your program.

    5.  Press the RUN button to finish.

    Note

    If a station has been assigned as a pump start, you will get a message that says “Non-adjustable Mode.”

     


    Previewing Changes

    While in the ADJUST menu, you can preview the scheduling impact of the change you made by pressing and holding the * button. The screen displays something similar in the example below.


    The abbreviations on the preview screen are described below.

    Abbreviation
    Meaning
    ST01    
    Station and number
    A
    Program Assignment
    15.2
    Runtime
    MIN
    Minutes
    03X
    Number of Cycles
    AUTO
    Program Mode
    WK1/WK2
    Week 1, Week 2
    S-T-T-F
    Water day pattern
    +15%
    % Adjust
    Soak 5
    Soak time between cycles in minutes