The steepness of a slope can impact a station’s maximum cycle time. The WeatherTRAK controller allows you to adjust for slope type so efficient watering minimizing run-off can occur. Slope types are listed in the table below.
| Slope Type | Grade |
|---|---|
| none/slight |
0-5% grade |
| gentle |
6-8% grade |
| mild |
9-12% grade |
| moderate |
13-20% grade |
| steep |
greater than 20% grade |
1. Press STATIONS. The SELECT STATION screen displays.
2. Press + or – to select the desired station.
3. Press à until the slope factor screen displays.
4. Press + or – to set slope type.