BL-PFS-100 (Plastic) and BL-BSF-150 (Brass)

• Paddle-style design with a paddle wheel that sends a pulse each time it spins.
• Built-in biCoder with LED lights on top, connected to the 2-wire path.
• As water flows through, pulses are sent to the controller, which it can read.
• 6" size; smaller sizes are through-style, while larger sizes are saddle-style that mount into a pipe.

Setup Verification

• Because the flow biCoder is built in, the device is pre-programmed with the K-value and offset value.

BL-BFM-100 (Brass Flow Meter)

• Disc-style design with an internal rotating disc.
• Provides the same analog reading.
• Current flow can be viewed in the field without the controller.
• Has a built-in biCoder that connects to the 2-wire path.
• Pre-programmed.
• Includes a photodiode; for retrofitting an existing meter to a Baseline system, it’s recommended to have a meter head with photodiode output that can sit on top.

BL-BHM-150-NO (Brass Hydrometer)

• Available in 1½" and 4" sizes.
• Disc-style flow recorder combined with a master valve assembly, two devices in one.
• One biCoder reads flow from the register; another master valve connects to the solenoid.
• Compact design fits into tight spaces, ideal for retrofits.
• Horizontal turbine with built-in stream straightener.

Valve types:

• Normally Closed – Tubing from the solenoid returns to the bottom of the hydrometer body.
• Normally Open – Tubing from the top of the solenoid vents to atmosphere.
• Toggle switch with three positions:
  • Close – Prevents diaphragm from opening.
  • Open – Flows water continuously.
  • Auto – Automated by the system to manage and monitor flow per design.
• Manual bleed via small brass trigger to open the solenoid manually if needed.

BL-CP-PFS100 (Plastic Flow Sensor)

• Built-in biCoder with integrated transducer.
• Master valve biCoder allows connection of an external master valve.
• Includes a pressure biCoder.
• Single 2-wire output.
• Available in 1", 1½", and 2" sizes.

BL-5309 and BL-5308  

• Can connect with most flow devices on the market and to an output.
• BL-5309 (top right) – Has purple wire provides 12V power to external devices.
• BL-5308 (bottom) – Has blue wire for meters that do not require power (most pulsed-output devices).
• Suitable for paddle-style flow meters that operate without additional power.