Table of Contents
To set the WeatherTRAK controller to shutdown from the controller:To set the WeatherTRAK controller to Shutdown from WeatherTRAK.net: To take the controller out of shutdown mode from the controller: To take the controller out of shutdown mode from WeatherTRAK.net:The Shutdown mode will cause the WeatherTRAK controller to stop current and future irrigation indefinitely. Depletion for stations in auto will be accumulated, the normally open master valve will be energized and the controller will still run the daily valve check.
The shutdown mode should not be used long term as continuous power to a solenoid may cause premature solenoid failure.
To set the WeatherTRAK controller to shutdown from the controller:
1. Press OFF.
2. Press + or – until the Shutdown screen displays. A 5-second countdown will begin, shutting down the controller.
To set the WeatherTRAK controller to Shutdown from WeatherTRAK.net:
1. From the Smart Irrigation tab select Manage Controller.
2. In the Controller window, select the desired controller from the drop-down menu.
3. Next to Controller Mode click Edit.
4. The Controller Mode window displays. Click Shutdown.
5. Click Update Mode to finish.
To take the controller out of shutdown mode from the controller:
1. Press OFF.
2. Press * to resume. The controller should power up again within 10 seconds.
To take the controller out of shutdown mode from WeatherTRAK.net:
1. From the Smart Irrigation tab select Manage Controller.
2. In the Controller window, select the desired controller from the drop-down menu.
3. Next to Controller Mode click edit. The controller mode window displays.
4. Click ON.
5. Click Update Mode to finish.